Mechanical Bulldog Action Figure Movable Dog Model Office Car Dashboard Ornament Collectible Gift For Adults Toy Fans

PURCHASE NOTICE
If you cannot accept the following terms, PLEASE DO NOT PLACE AN ORDER. Placing an order will be deemed as your full understanding and acceptance of all the items listed below.

1.All homemade anime figures are assembled by molds and hand-painted. Minor flaws such as seams, uneven coloring, air bubbles and scratches are inevitable—absolute perfection cannot be guaranteed. These figures feature high cost-performance ratio. Please refrain from purchasing if you have extremely high requirements for details.

2.All products sold in our store are 100% brand-new. Please buy with complete confidence.

3.If your figure is deformed due to extrusion, unable to stand stably, or difficult to assemble because of tight joints, you can heat it with a hair dryer or soak it in hot water for 3–5 minutes. Adjust the figure after the PVC material softens, and the problem will be solved. Note that PVC material is susceptible to temperature changes, which may cause the above issues—heating and adjusting will easily fix them.

4.If there is any paint adhesion on the figure, gently wipe the affected area with a cotton swab dipped in essential balm, and the problem can be basically resolved.

5.In case of glue failure or loose joints of the model, apply a small amount of 502 glue to the connection part for firm adhesion.
⚠️ Important Disclaimer: The above-mentioned issues are normal phenomena of handmade PVC figures and NOT regarded as quality problems. Please acknowledge this before placing your order.

PURCHASE NOTICE
If you cannot accept the following terms, PLEASE DO NOT PLACE AN ORDER. Placing an order will be deemed as your full understanding and acceptance of all the items listed below.

1.All homemade anime figures are assembled by molds and hand-painted. Minor flaws such as seams, uneven coloring, air bubbles and scratches are inevitable—absolute perfection cannot be guaranteed. These figures feature high cost-performance ratio. Please refrain from purchasing if you have extremely high requirements for details.

2.All products sold in our store are 100% brand-new. Please buy with complete confidence.

3.If your figure is deformed due to extrusion, unable to stand stably, or difficult to assemble because of tight joints, you can heat it with a hair dryer or soak it in hot water for 3–5 minutes. Adjust the figure after the PVC material softens, and the problem will be solved. Note that PVC material is susceptible to temperature changes, which may cause the above issues—heating and adjusting will easily fix them.

4.If there is any paint adhesion on the figure, gently wipe the affected area with a cotton swab dipped in essential balm, and the problem can be basically resolved.

5.In case of glue failure or loose joints of the model, apply a small amount of 502 glue to the connection part for firm adhesion.
⚠️ Important Disclaimer: The above-mentioned issues are normal phenomena of handmade PVC figures and NOT regarded as quality problems. Please acknowledge this before placing your order.

PURCHASE NOTI
If you cannot accept the following terms, PLEASE DO NOT PLACE AN ORDER. Placing an order will be deemed as your full understanding and acceptance of all the items listed below.

1.All homemade anime figures are assembled by molds and hand-painted. Minor flaws such as seams, uneven coloring, air bubbles and scratches are inevitable—absolute perfection cannot be guaranteed. These figures feature high cost-performance ratio. Please refrain from purchasing if you have extremely high requirements for details.

2.All products sold in our store are 100% brand-new. Please buy with complete confidence.

3.If your figure is deformed due to extrusion, unable to stand stably, or difficult to assemble because of tight joints, you can heat it with a hair dryer or soak it in hot water for 3–5 minutes. Adjust the figure after the PVC material softens, and the problem will be solved. Note that PVC material is susceptible to temperature changes, which may cause the above issues—heating and adjusting will easily fix them.

4.If there is any paint adhesion on the figure, gently wipe the affected area with a cotton swab dipped in essential balm, and the problem can be basically resolved.

5.In case of glue failure or loose joints of the model, apply a small amount of 502 glue to the connection part for firm adhesion.
⚠️ Important Disclaimer: The above-mentioned issues are normal phenomena of handmade PVC figures and NOT regarded as quality problems. Please acknowledge this before placing your order.

PURCHASE NOTICE
If you cannot accept the following terms, PLEASE DO NOT PLACE AN ORDER. Placing an order will be deemed as your full understanding and acceptance of all the items listed below.

1.All homemade anime figures are assembled by molds and hand-painted. Minor flaws such as seams, uneven coloring, air bubbles and scratches are inevitable—absolute perfection cannot be guaranteed. These figures feature high cost-performance ratio. Please refrain from purchasing if you have extremely high requirements for details.

2.All products sold in our store are 100% brand-new. Please buy with complete confidence.

3.If your figure is deformed due to extrusion, unable to stand stably, or difficult to assemble because of tight joints, you can heat it with a hair dryer or soak it in hot water for 3–5 minutes. Adjust the figure after the PVC material softens, and the problem will be solved. Note that PVC material is susceptible to temperature changes, which may cause the above issues—heating and adjusting will easily fix them.

4.If there is any paint adhesion on the figure, gently wipe the affected area with a cotton swab dipped in essential balm, and the problem can be basically resolved.

5.In case of glue failure or loose joints of the model, apply a small amount of 502 glue to the connection part for firm adhesion.
⚠️ Important Disclaimer: The above-mentioned issues are normal phenomena of handmade PVC figures and NOT regarded as quality problems. Please acknowledge this before placing your order.

PURCHASE NOTICE
If you cannot accept the following terms, PLEASE DO NOT PLACE AN ORDER. Placing an order will be deemed as your full understanding and acceptance of all the items listed below.

1.All homemade anime figures are assembled by molds and hand-painted. Minor flaws such as seams, uneven coloring, air bubbles and scratches are inevitable—absolute perfection cannot be guaranteed. These figures feature high cost-performance ratio. Please refrain from purchasing if you have extremely high requirements for details.

2.All products sold in our store are 100% brand-new. Please buy with complete confidence.

3.If your figure is deformed due to extrusion, unable to stand stably, or difficult to assemble because of tight joints, you can heat it with a hair dryer or soak it in hot water for 3–5 minutes. Adjust the figure after the PVC material softens, and the problem will be solved. Note that PVC material is susceptible to temperature changes, which may cause the above issues—heating and adjusting will easily fix them.

4.If there is any paint adhesion on the figure, gently wipe the affected area with a cotton swab dipped in essential balm, and the problem can be basically resolved.

5.In case of glue failure or loose joints of the model, apply a small amount of 502 glue to the connection part for firm adhesion.
⚠️ Important Disclaimer: The above-mentioned issues are normal phenomena of handmade PVC figures and NOT regarded as quality problems. Please acknowledge this before placing your order.

产品名称：机器狗红色/绿色

产品高度：15.5-10-10.5cm

产品重量：200克

装箱数量：500pcs